Author: Sam Snider

RJ45 pin order for a Cat6 or Cat5e Ethernet cable

Is Cat6 Better Than Cat5e? Cat6 Adds Headroom, Cat5e Saves Cost

Posted on 2026-07-10 by Sam Snider

Is Cat6 better than Cat5e? Cat5e suits gigabit value; Cat6 adds crosstalk headroom. Learn to make an Ethernet cable. Follow RJ45 pin numbers, crimping, and testing.

Fiber ONT connected to a long Ethernet cable run

Long Ethernet Cable Runs from a Fiber Modem or ONT

Posted on 2026-07-08 by Sam Snider

Plan a long Ethernet cable run from a fiber modem or ONT: identify the Ethernet handoff, stay within the 100 m copper channel limit, terminate T568A or T568B, and use fiber beyond it.

Comparison of dispatch services, taxi dispatch software, and truck dispatch workflows

Dispatch Services vs. Taxi Dispatch Software for Taxi and Truck Operations

Posted on 2026-07-06 by Sam Snider

Compare dispatch services with taxi dispatch software and truck dispatch workflows. Learn how intake, routing, tracking, exceptions, records, and settlement shape the best setup.

Logistics and dispatch dashboard connected to ELD logs

Logistics Software for Dispatching and ELD Workflows

Posted on 2026-07-06 by Sam Snider

See how logistics software and dispatching software move loads, routes, driver status, and documents through ELD workflows from assignment and tracking to exceptions, billing handoff, and reports.

Equipment tracking devices installed on fleet assets

Equipment Tracking Apps and Devices: How to Choose the Right Setup

Posted on 2026-07-06 by Sam Snider

Compare equipment tracking devices and fleet tracking apps by asset behavior, update rate, coverage, accuracy, power, alerts, history, utilization, and maintenance—then install and test your setup.

Route optimization dashboard for last-mile delivery planning

Route Optimization App vs. TMS Software for Last-Mile Delivery

Posted on 2026-07-06 by Sam Snider

A route optimization app helps with dispatching, but TMS software covers planning, carrier tendering, tracking, proof of delivery, settlement, and integrations. See when managed services fit.

PLC simulator screen showing a motor start sequence and simulated fault states

PLC Simulator Guide for Beginners

Posted on 2026-07-05 by Sam Snider

Use a PLC simulator to write and test a beginner control sequence, learn scan cycles, timers, interlocks, and fault checks, then compare the same application with a remote RTU.

Telemetry monitoring flow from sensor to dashboard and operator response

Telemetry Monitoring: How Remote Measurements Become Actions

Posted on 2026-07-05 by Sam Snider

Telemetry monitoring follows sensor measurements through sampling, transport, storage, dashboards, alarms, and operator response, with practical checks for data quality and recovery.

RJ45 Ethernet cable wiring with T568A and T568B pinouts

RJ45 Standard Guide: Choose and Wire the Right Ethernet Cable

Posted on 2026-07-05 by Sam Snider

Learn the RJ45 standard, compare Cat5e, Cat6, and Cat6A, choose the best Ethernet cable for your run, wire T568A or T568B, and verify the finished link.

Industrial control room showing HMI screens with SCADA data from field devices and RTUs.

Industrial Control Systems: How HMI, SCADA, and RTUs Work Together

Posted on 2026-07-05 by Sam Snider

Learn how industrial control systems connect sensors, actuators, PLCs, RTUs, SCADA servers, historians, alarms, and HMI clients in one end-to-end control path.